当前时区 GMT+8, 现在时间是 2008-7-7 02:25 游客: 注册 登录 仅登录论坛 | 搜索 帮助

中国Linux公社论坛 » 硬件配置 » 征集笔记本上的xorg配置文件

 28  1/2 12››
 
打印 | 推荐 | 订阅 | 收藏
标题: 征集笔记本上的xorg配置文件
积木
版主
Rank: 7Rank: 7Rank: 7


UID 199895
精华 4
积分 5167
帖子 4253
阅读权限 255
注册 2005-9-13
状态 离线
#1
发表于 2006-5-4 23:50  资料  主页 短消息  加为好友  添加 积木 为MSN好友 通过MSN和 积木 交谈 QQ
征集笔记本上的xorg配置文件

在笔记本上跑xorg算是最麻烦的了。
一般的功能还可以，
可是Fn+...调整亮度
配置刷新率一类的细节就让人摸不到头脑。
请弟兄们共享自己的xorg.conf
尤其是XKb的相关内容，让Xorg在大家的本子上跑的更好。





我的blog 一块积木 http://blog.csdn.net/goodboy1881 我MM的blog http://sunjueqian.spaces.live.com/
顶部
fox3
注册会员
Rank: 2



UID 215484
精华 1
积分 215
帖子 84
阅读权限 20
注册 2006-4-9
状态 离线
#2
发表于 2006-5-13 03:17  资料  短消息  加为好友 
GMA900(910GM):
# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
        FontPath     "/usr/X11R6/lib/X11/fonts/TTF"
        FontPath     "/usr/share/fonts/default/Type1"
        FontPath     "/usr/share/fonts/ttf/zh_CN"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "GLcore"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "dri"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option            "XbkModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"

        # Modified by system-config-mouse
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Device" "/dev/input/mice"
        Option            "Protocol" "IMPS/2"
        Option            "Emulate3Buttons" "no"
        Option            "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "LCD Panel 1024x768"
### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    31.5 - 48.5
        VertRefresh  40.0 - 70.0
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "i810"
        VendorName  "Videocard vendor"
        BoardName   "Intel GMA900"
        VideoRam    32768
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

神舟承运B370R，倒是蓝牙棒和读卡器不知怎么用郁闷...





看新闻，赚现金！无须点击广告，不必投入资金！谁先加入谁先收益，赶快注册吧！
顶部
土的掉渣
注册会员
Rank: 2


UID 217820
精华 1
积分 171
帖子 72
阅读权限 20
注册 2006-5-10
来自 苏州
状态 离线
#3
发表于 2006-5-15 19:57  资料  主页 短消息  加为好友 
Acer Aspire3020
ATI Radeon Mobility X600
[code:1]
# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
        FontPath     "/usr/X11R6/lib/X11/fonts/TTF"
        FontPath     "/usr/share/fonts/default/Type1"
        FontPath     "/usr/share/fonts/ttf/zh_CN"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "dri"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XbkModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Digital 17 in. Color (FR-PCXBV-KA)"
### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    30.0 - 66.0
        VertRefresh  50.0 - 130.0
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "radeon"
        VendorName  "Videocard vendor"
        BoardName   "ATI Radeon Mobility X600"
        VideoRam    65536
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection
[/code:1]

PS：显示器是那个我是在WIN下看的……所以选了一个厂商的，也可以用，还好没有超出频率





欧佰网
顶部
Truth
注册会员
Rank: 2



UID 205777
精华 2
积分 422
帖子 176
阅读权限 20
注册 2005-11-20
来自 Beijing
状态 离线
#4
发表于 2006-5-24 02:52  资料  主页 短消息  加为好友 
ACER FERRARI 4005
SUSE 10.1 + xgl

[code:1]# /.../
# SaX generated X11 config file
# Created on: 2006-05-13T15:00:12+0800.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [SaX2] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
    FontPath         "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/local"
    FontPath         "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath         "/usr/X11R6/lib/X11/fonts/URW"
    FontPath         "/usr/X11R6/lib/X11/fonts/truetype"
    FontPath         "/usr/X11R6/lib/X11/fonts/uni:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/CID"
    FontPath         "/opt/kde3/share/fonts"
    FontPath         "/usr/local/share/fonts"
EndSection

Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "v4l"
  Load         "dri"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail" "on"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "us"
  Option       "XkbModel" "pc104"
  Option       "XkbRules" "xfree86"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "10"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "Logitech USB-PS/2 Optical Mouse"
  Option       "Protocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
  Driver       "synaptics"
  Identifier   "Mouse[3]"
  Option       "Buttons" "5"
  Option       "Device" "/dev/input/mice"
  Option       "Emulate3Buttons" "on"
  Option       "InputFashion" "Mouse"
  Option       "Name" "Synaptics;Touchpad"
  Option       "Protocol" "explorerps/2"
  Option       "SHMConfig" "on"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
  Option       "CalcAlgorithm" "XServerPool"
  DisplaySize  330 210
  HorizSync    31-60
  Identifier   "Monitor[0]"
  ModelName    "SEC 1024"
  Option       "DPMS"
  VendorName   "SAMSUNG"
  VertRefresh  30-60
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
EndSection


Section "Device"
  BoardName    "Mobility Radeon X700 5653 (M26) (PCIE)"
  BusID        "1:0:0"
  Driver       "fglrx"
  Identifier   "Device[0]"
  Option       "MonitorLayout" "LVDS,AUTO"
  #Option       "NoDDC"
  Option       "UseInternalAGPGART" "no"
  Option       "no_accel" "no"
  Option       "no_dri" "no"
  Option       "mtrr" "off"
  Option       "ScreenOverlap" "0"
  Option       "GammaCorrectionI" "0x00000000"
  Option       "GammaCorrectionII" "0x00000000"
  Option       "Capabilities" "0x00000000"
  Option       "CapabilitiesEx" "0x00000000"
  Option       "VideoOverlay" "on"
  Option       "OpenGLOverlay" "off"
  Option       "CenterMode" "off"
  Option       "PseudoColorVisuals" "off"
  Option       "Stereo" "off"
  Option       "StereoSyncEnable" "1"
  Option       "FSAAEnable" "no"
  Option       "FSAAScale" "1"
  Option       "FSAADisableGamma" "no"
  Option       "FSAACustomizeMSPos" "no"
  Option       "FSAAMSPosX0" "0.000000"
  Option       "FSAAMSPosY0" "0.000000"
  Option       "FSAAMSPosX1" "0.000000"
  Option       "FSAAMSPosY1" "0.000000"
  Option       "FSAAMSPosX2" "0.000000"
  Option       "FSAAMSPosY2" "0.000000"
  Option       "FSAAMSPosX3" "0.000000"
  Option       "FSAAMSPosY3" "0.000000"
  Option       "FSAAMSPosX4" "0.000000"
  Option       "FSAAMSPosY4" "0.000000"
  Option       "FSAAMSPosX5" "0.000000"
  Option       "FSAAMSPosY5" "0.000000"
  Option       "UseFastTLS" "0"
  Option       "BlockSignalsOnLock" "on"
  Option       "ForceGenericCPU" "no"
  Option       "KernelModuleParm" "agplock=0"
  VendorName   "ATI"
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1680x1050"
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1680x1050"
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1680x1050"
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1680x1050"
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  InputDevice  "Mouse[3]" "SendCoreEvents"
  Screen       "Screen[0]"
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

[/code:1]





iopenSuSE 10.3 x86_64, kernel 2.6.22.9 KDE 3.5.7 Opera 9.5 build-1600
www.Operachina.com
顶部
woolzey
注册会员
Rank: 2



UID 178516
精华 1
积分 435
帖子 172
阅读权限 20
注册 2005-1-18
状态 离线
#5
发表于 2006-5-24 05:24  资料  短消息  加为好友 
Fn快捷键调整屏幕亮度主要是ACPI在控制。

对华硕、IBM、东芝的笔记本，2.6内核里有相应的模块，载入模块后大多数型号的笔记本的相关快捷键就可以正常工作了。

其他品牌/型号的笔记本，可能需要核心的hotkey模块（配合合适的DSDT）。在核心源码包里面有相关的文档：Documentation/acpi-hotkey.txt

反正这方面的工作通过acpi来做要简单的多，至少这三个牌子的笔记本是这样。

顶部
i小科子
新手上路
Rank: 1



UID 218966
精华 0
积分 10
帖子 4
阅读权限 10
注册 2006-5-27
状态 离线
#6
发表于 2006-5-27 10:11  资料  短消息  加为好友  添加 i小科子 为MSN好友 通过MSN和 i小科子 交谈
好东西啊，我正好在找这些问题的答案呢！感谢

顶部
鲜橙加冰
新手上路
Rank: 1


UID 195520
精华 0
积分 63
帖子 26
阅读权限 10
注册 2005-7-17
来自 China
状态 离线
#7
发表于 2006-6-10 15:22  资料  短消息  加为好友  添加 鲜橙加冰 为MSN好友 通过MSN和 鲜橙加冰 交谈 QQ
HP DV1306
ubuntu6.06+aiglx

[code:1]# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
   FontPath "/usr/share/fonts/Chinese/wqy-bitmapfont"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath "unix/:7100"
EndSection

Section "Module"
#       Load    "GLcore"
#        Load        "i2c"
        Load        "bitmap"
        Load        "ddc"
        Load        "dri"
        Load        "extmod"
        Load        "freetype"
        Load        "glx"
        Load        "int10"
        Load        "type1"
        Load        "vbe"
EndSection

Section "InputDevice"
        Identifier        "Generic Keyboard"
        Driver                "kbd"
        Option                "CoreKeyboard"
        Option                "XkbRules"        "xorg"
        Option                "XkbModel"        "pc104"
        Option                "XkbLayout"        "us"
EndSection

Section "InputDevice"
        Identifier        "Configured Mouse"
        Driver                "mouse"
        Option                "CorePointer"
        Option                "Device"                "/dev/input/mice"
        Option                "Protocol"                "ExplorerPS/2"
        Option                "ZAxisMapping"                "4 5"
        Option                "Emulate3Buttons"        "true"
EndSection

Section "InputDevice"
        Identifier        "Synaptics Touchpad"
        Driver                "synaptics"
        Option                "SendCoreEvents"        "true"
        Option                "Device"                "/dev/psaux"
        Option                "Protocol"                "auto-dev"
        Option                "HorizScrollDelta"        "0"
EndSection

Section "Device"
        Identifier        "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
        Driver                "i810"
   Option      "XAANoOffscreenPixmaps"
        BusID                   "PCI:0:2:0"
EndSection

Section "Monitor"
        Identifier        "Generic Monitor"
        Option                "DPMS"
EndSection

Section "Screen"
        Identifier        "Default Screen"
        Device                "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
        Monitor                "Generic Monitor"
        DefaultDepth        24
        SubSection "Display"
                Depth                1
                Modes                "1280x768"
        EndSubSection
        SubSection "Display"
                Depth                4
                Modes                "1280x768"
        EndSubSection
        SubSection "Display"
                Depth                8
                Modes                "1280x768"
        EndSubSection
        SubSection "Display"
                Depth                15
                Modes                "1280x768"
        EndSubSection
        SubSection "Display"
                Depth                16
                Modes                "1280x768"
        EndSubSection
        SubSection "Display"
                Depth                24
                Modes                "1280x768"
        EndSubSection
EndSection

Section "ServerLayout"
   Option "AIGLX" "true"
        Identifier        "Default Layout"
        Screen                "Default Screen"
        InputDevice        "Generic Keyboard"
        InputDevice        "Configured Mouse"
        InputDevice        "Synaptics Touchpad"
EndSection

Section "DRI"
        Mode        0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection
[/code:1]

顶部
死乘把口
新手上路
Rank: 1


UID 142849
精华 0
积分 39
帖子 18
阅读权限 10
注册 2004-7-26
来自 Nanking
状态 离线
#8
发表于 2006-6-18 20:19  资料  主页 短消息  加为好友  添加 死乘把口 为MSN好友 通过MSN和 死乘把口 交谈 QQ ICQ 状态
HP COMPAQ nc/nx 6120
915/GMA900

[code:1]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load        "i2c"
        Load        "bitmap"
        Load        "ddc"
        Load        "dri"
        Load        "extmod"
        Load        "freetype"
        Load        "glx"
        Load        "int10"
        Load        "type1"
        Load        "vbe"
EndSection

Section "InputDevice"
        Identifier        "Generic Keyboard"
        Driver                "kbd"
        Option                "CoreKeyboard"
        Option                "XkbRules"        "xorg"
        Option                "XkbModel"        "pc104"
        Option                "XkbLayout"        "us"
EndSection

Section "InputDevice"
        Identifier        "Configured Mouse"
        Driver                "mouse"
        Option                "CorePointer"
        Option                "Device"                "/dev/input/mice"
        Option                "Protocol"                "ExplorerPS/2"
        Option                "ZAxisMapping"                "4 5"
        Option                "Emulate3Buttons"        "true"
EndSection

Section "InputDevice"
        Identifier        "Synaptics Touchpad"
        Driver                "synaptics"
        Option                "SendCoreEvents"        "true"
        Option                "Device"                "/dev/psaux"
        Option                "Protocol"                "auto-dev"
        Option                "HorizScrollDelta"        "0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier        "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
        Driver                "i810"
        BusID                "PCI:0:2:0"
EndSection

Section "Monitor"
        Identifier        "Generic Monitor"
        Option                "DPMS"
EndSection

Section "Screen"
        Identifier        "Default Screen"
        Device                "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
        Monitor                "Generic Monitor"
        DefaultDepth        24
        SubSection "Display"
                Depth                1
                Modes                "1024x768"
        EndSubSection
        SubSection "Display"
                Depth                4
                Modes                "1024x768"
        EndSubSection
        SubSection "Display"
                Depth                8
                Modes                "1024x768"
        EndSubSection
        SubSection "Display"
                Depth                15
                Modes                "1024x768"
        EndSubSection
        SubSection "Display"
                Depth                16
                Modes                "1024x768"
        EndSubSection
        SubSection "Display"
                Depth                24
                Modes                "1024x768"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier        "Default Layout"
        Screen                "Default Screen"
        InputDevice        "Generic Keyboard"
        InputDevice        "Configured Mouse"
        InputDevice     "stylus" "SendCoreEvents"
        InputDevice     "cursor" "SendCoreEvents"
        InputDevice     "eraser" "SendCoreEvents"
        InputDevice        "Synaptics Touchpad"
EndSection

Section "DRI"
        Mode        0666
EndSection
[/code:1]





Unix Linux 爱好者中文社区
顶部
netjune
中级会员
Rank: 3Rank: 3


UID 158830
精华 1
积分 722
帖子 290
阅读权限 30
注册 2004-10-9
来自 China
状态 离线
#9
发表于 2006-6-23 16:18  资料  短消息  加为好友  QQ
请问2楼，你的kernel和X是什么版本？我的X是6.8.2，咱俩显卡一样，同样的xorg.conf在我上面不行。电脑是联想旭日125c的





c2 400+192m+aureal snd+tnt2+40G++slackware10.2,很古董吧
顶部
mengchr
新手上路
Rank: 1


UID 221349
精华 0
积分 10
帖子 4
阅读权限 10
注册 2006-7-7
状态 离线
#10
发表于 2006-7-7 11:14  资料  短消息  加为好友  添加 mengchr 为MSN好友 通过MSN和 mengchr 交谈
神舟天运Q420S
mandriva 2006
[code:1][root@localhost ~]# cat /etc/X11/xorg.conf
# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
    # Multiple FontPath entries are allowed (they are concatenated together)
    # By default, Mandrake 6.0 and later now use a font server independent of
    # the X server to render fonts.
    FontPath "unix/:-1"
EndSection

Section "ServerFlags"
    #DontZap # disable <Crtl><Alt><BS> (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
EndSection

Section "InputDevice"
    Identifier "Keyboard1"
    Driver "keyboard"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "en_US"
    Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
    Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Generic"
    ModelName "Flat Panel 1280x800"
    HorizSync 31.5-90
    VertRefresh 60

    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630

    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_120"  181.21  1280 1376 1520 1760  800 801 804 858  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_100"  147.89  1280 1376 1512 1744  800 801 804 848  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_85"  123.38  1280 1368 1504 1728  800 801 804 840  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_75"  107.21  1280 1360 1496 1712  800 801 804 835  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_60"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_50"  68.56  1280 1336 1472 1664  800 801 804 824  -HSync +Vsync
EndSection

Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 945"
    Driver "i810"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 16

    Subsection "Display"
        Depth 8
        Virtual 1280 800
    EndSubsection

    Subsection "Display"
        Depth 15
        Virtual 1280 800
    EndSubsection

    Subsection "Display"
        Depth 16
        Virtual 1280 800
    EndSubsection

    Subsection "Display"
        Depth 24
        Virtual 1280 800
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    Screen "screen1"
EndSection
[root@localhost ~]#
[/code:1]





新人希望多和大家交流.神舟天运Q420S ‎Intel(R) Celeron(R) M 420 @ 1.60GHz Marvell Yukon 88E8053 GB Adapter Graphics Controller Intel 945 INTEL Controller Hub High Definition Audio（ICH7） SATA FUJITSU MHV2060B MSN:mengchr＠hotmail.com
顶部
yanxu_cauc
新手上路
Rank: 1


UID 54078
精华 1
积分 89
帖子 35
阅读权限 10
注册 2003-8-3
来自 China.gif
状态 离线
#11
发表于 2006-7-12 14:12  资料  短消息  加为好友 
神舟优雅Q310S，MagicLinux 2.0
[code:1]
# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen      0   "Screen0" 0 0
        InputDevice     "Mouse0" "CorePointer"
        InputDevice     "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath         "/usr/X11R6/lib/X11/rgb"

    FontPath         "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath         "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath         "/usr/X11R6/lib/X11/fonts/TTF"
    FontPath         "/usr/share/fonts/default/Type1"
    FontPath         "/usr/share/fonts/ttf/zh_CN"
    FontPath         "/usr/share/fonts"
EndSection

Section "Module"
        Load    "dbe"
        Load    "extmod"
        Load    "fbdevhw"
        Load    "glx"
        Load    "record"
        Load    "freetype"
        Load    "type1"
EndSection

Section "InputDevice"
        Identifier      "Keyboard0"
        Driver          "keyboard"
        Option          "XkbRules" "xfree86"
        Option          "XbkModel" "pc105"
        Option          "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier      "Mouse0"
        # Modified by system-config-mouse
        Driver                "mouse"
        Option        "Device"        "/dev/input/mice"
        Option        "Protocol"        "IMPS/2"
        Option        "Emulate3Buttons"        "no"
        Option                "ZAxisMapping"        "4 5"
EndSection

Section "Monitor"
        Identifier      "Monitor0"
        VendorName      "Monitor Vendor"
        ModelName       "Unknown monitor"
        HorizSync       31.5 - 37.9
        VertRefresh     50.0 - 70.0
EndSection

Section "Device"
        Identifier      "Videocard0"
        Driver          "sis"
        VendorName      "Videocard vendor"
        BoardName       "SiS 660/661FX/M661FX/M661MX/741/741GX/M741/760/M760"
        VideoRam        16384
EndSection

Section "Screen"
        Identifier      "Screen0"
        Device          "Videocard0"
        Monitor         "Monitor0"
        DefaultDepth    16
        SubSection        "Display16"
                Depth        16
                Modes        "1280x800"
        EndSubSection
EndSection
[/code:1]

顶部
fc5zach
新手上路
Rank: 1



UID 222369
精华 0
积分 25
帖子 10
阅读权限 10
注册 2006-7-23
来自 大连
状态 离线
#12
发表于 2006-7-23 21:29  资料  短消息  加为好友  QQ
我的是dell的630m

这个一直搞不好....郁闷

顶部
chenzhouc
新手上路
Rank: 1



UID 210927
精华 0
积分 13
帖子 5
阅读权限 10
注册 2006-2-11
状态 离线
#13
发表于 2006-7-30 17:32  资料  短消息  加为好友  QQ
联想 昭阳 A800
[root@localhost X11]# cat /etc/X11/xorg.conf

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Synaptics" "CorePointer"
        InputDevice    "Mouse0" "AlwaysCore"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "synaptics"
        Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
        Identifier  "Synaptics"
        Driver      "synaptics"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "auto-dev"
        Option      "Emulate3Buttons" "yes"
        Option      "LeftEdge" "120"
        Option      "RightEdge" "830"
        Option      "TopEdge" "120"
        Option      "BottomEdge" "650"
        Option      "FingerLow" "14"
        Option      "FingerHigh" "15"
        Option      "MaxTapMove" "110"
        Option      "VertScrollDelta" "20"
        Option      "HorizScrollDelta" "20"
        Option      "MinSpeed" "0.3"
        Option      "MaxSpeed" "0.75"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "LCD Panel 1024x768"
### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    31.5 - 48.5
        VertRefresh  40.0 - 70.0
        Option      "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nv"
        VendorName  "Videocard vendor"
        BoardName   "nVidia Corporation NV17 [GeForce4 420 Go]"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes    "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection





Sank Boat
顶部
Yizhi0331
新手上路
Rank: 1



UID 222816
精华 0
积分 10
帖子 4
阅读权限 10
注册 2006-7-29
状态 离线
#14
发表于 2006-7-30 20:56  资料  主页 短消息  加为好友  添加 Yizhi0331 为MSN好友 通过MSN和 Yizhi0331 交谈 QQ
MT..MT...

[quote:a3d2ee9bd9="fc5zach"]我的是dell的630m

这个一直搞不好....郁闷[/quote]
Me Too,Me Too
再加上内核升不上
网卡也不能用

顶部
yongtaos
新手上路
Rank: 1


UID 171086
精华 0
积分 25
帖子 10
阅读权限 10
注册 2004-11-28
来自 China.gif
状态 离线
#15
发表于 2006-8-10 14:23  资料  短消息  加为好友 
# /.../
# SaX generated X11 config file
# Created on: 2006-08-07T13:03:21+0800.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/opt/kde3/share/fonts"
  FontPath     "/usr/local/share/fonts"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail"
EndSection

Section "Module"
  Load         "glx"
  Load         "type1"
  Load         "extmod"
  Load         "dbe"
  Load         "freetype"
  Load         "v4l"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "us"
  Option       "XkbModel" "pc104"
  Option       "XkbRules" "xfree86"
EndSection


Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "5"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "Logitech USB-PS/2 Optical Mouse"
  Option       "Protocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
  Driver       "synaptics"
  Identifier   "Mouse[3]"
  Option       "Device" "/dev/input/mice"
  Option       "Emulate3Buttons" "on"
  Option       "InputFashion" "Mouse"
  Option       "Name" "Synaptics;Touchpad"
  Option       "Protocol" "explorerps/2"
  Option       "SHMConfig" "on"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
  DisplaySize  300 230
  HorizSync    28-64
  Identifier   "Monitor[0]"
  ModelName    "15 IN. COLOR"
  VendorName   "AT&T"
  VertRefresh  50-90
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
  Modeline         "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
  Modeline         "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
  Modeline         "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
  Modeline         "800x600" 58.73 800 840 928 1056 600 601 604 632
  Modeline         "800x600" 51.73 800 840 928 1056 600 601 604 628
  Modeline         "800x600" 44.13 800 840 920 1040 600 601 604 624
  Modeline         "800x600" 36.88 800 832 912 1024 600 601 604 621
  Modeline         "768x576" 53.75 768 808 888 1008 576 577 580 606
  Modeline         "768x576" 47.41 768 808 888 1008 576 577 580 603
  Modeline         "768x576" 40.41 768 800 880 992 576 577 580 599
  Modeline         "768x576" 33.74 768 792 872 976 576 577 580 596
  Modeline         "640x480" 36.97 640 672 736 832 480 481 484 505
  Modeline         "640x480" 32.64 640 672 736 832 480 481 484 503
  Modeline         "640x480" 27.74 640 664 728 816 480 481 484 500
  Modeline         "640x480" 23.06 640 656 720 800 480 481 484 497
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      32
    Modes      "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "Device"
  BoardName    "GeForce Go 6600 (0x014"
  BusID        "1:0:0"
  Driver       "nvidia"
  Identifier   "Device[0]"
  Option       "XaaNoOffScreenPixmaps" "on"
  Option       "XaaNoPixmapCache" "on"
  Screen       0
  VendorName   "NVidia"
  Option      "RenderAccel" "true"
  Option      "AllowGLXWithComposite" "true"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  InputDevice  "Mouse[3]" "SendCoreEvents"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection