关于cygwin下skyeye的网络模拟问题请教
如果宿主机操作系统是linux需要加载tun.o模块，那么在cygwin上面没有设备，需要安装其它的什么组件么？
如果不需要，我使用Skyeye V1.2Rel 编译成功的skyeye.exe运行testsuite2.1下面的at91/uclinux_rtl8019时，启动画面如下：
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x4117c0
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
can't find device module: rtl8019
SKYEYE: use arm7100 mmu ops
Loaded ROM ./uclinux_rtl8019/romfs.img
exec file "./uclinux_rtl8019/linux"'s format is elf32-little.
load section .init: addr = 0x01000000 size = 0x0000b000.
load section .text: addr = 0x0100b000 size = 0x000e3920.
load section .data: addr = 0x010f0000 size = 0x0000a430.
not load section .bss: addr = 0x010fa440 size = 0x00022100 .
start addr is set to 0x01000000 by exec file.
Linux version 2.4.27-uc1 (skyeyeuser@debian) (gcc version 2.95.3 20010315 (relea
se)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP an
d shared lib patches from http://www.snapgear.com/)) #2 Tue Aug 9 18:45:41 CST 2
005
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2900KB available (910K code, 183K data, 44K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0xfffa0000: not found (no reset ack).
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-1512BFF [VIRTUAL 1400000-1512BFF] (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname GDB-ARMulator
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
mount: /etc/mtab: Read-only file system
Command: mount -t ext2 /dev/ram0 /var
mount: /etc/mtab: Read-only file system
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: mkdir /var/empty
Command: cat /etc/motd
Welcome to
____ _ _
/ __| ||_|
_ _| | | | _ ____ _ _ _ _
| | | | | | || | _ \| | | |\ \/ /
| |_| | |__| || | | | | |_| |/ \
| ___\____|_||_|_| |_|\____|\_/\_/
| |
|_|
GDB/ARMulator support by <davidm@snapgear.com>
For further information check:
http://www.uclinux.org/
Command: /bin/ifconfig eth0 up 10.0.0.2
SIOCGIFFLAGS: No such device
SIOCSIFADDR: No such device
pid 11: failed 512
Execution Finished, Exiting
init: Booting to single user mode
Sash command shell (version 1.1.1)
/>
从启动画面的提示看是没有找到相关的设备吧，请教一下是什么问题？谢谢
|
注册
登录
帮助
