我的skyeye.conf如下：
#skyeye for uboot flash 16M bank 1
mem_bank: map=M, type=RW, addr=0x00000000, size=0x001000000, file=./uboot.bin,boot=yes
mem_bank: map=M, type=RW, addr=0x00100000, size=0x00f00000, file=./vmlinux

#skyeye for uboot sdram 16M bank 1
mem_bank: map=M, type=RW, addr=0xc0000000, size=0x01000000

1.运行skyeye后可以正常导入uboot.bin和vmlinux ，并运行uboot，下一步如何运行linux内核呢？（vmlinux 在 sdram 的地址是什么呢？）
2.运行uboot.bin和vmlinux 需要多大的flash和sdram空间呢？
谢谢大家！！！

1. You can get vmlinux address in sdram in your own skyeye.conf. According to your skyeye.conf, vmlinux is placed at 0x00100000
2. That is up to your selection features of u-boot and linux.Anyway, I think 4M is enough for a simple system.