各位大侠 现在我在Load ./u-boot.bin后就过不去了 应该是skyeye.conf的配置问题
我的skyeye.conf配置文件如下

cpu: arm7tdmi

mach: s3c4510b

mem_bank: map=M, type=R, addr=0x01000000, size=0x00200000, file=./u-boot.bin, boot=yes
mem_bank: map=M, type=RW, addr=0x00000000, size=0x01000000
mem_bank: map=I, type=RW, addr=0x03ff0000, size=0x00010000

#define REG_BASE        (0x03ff0000)
#define PHYS_SDRAM_1                0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE        0x01000000 /* 16 MB */

#define PHYS_FLASH_1                0x01000000 /* Flash Bank #1 */
#define PHYS_FLASH_1_SIZE        0x00200000 /* 2 MB (one chip, 8bit access) */

#define PHYS_FLASH_2                0x02000000 /* Flash Bank #2 */
#define PHYS_FLASH_2_SIZE        0x00000000 /* 512KB (one chip, 8bit access) */