不好意思，问个问题
装好了cygwin，skyeye，ucosii4skyeye
然后
"4 调试 ucosii for skyeye

按照readme中，进入simple_test目录
1. make cleanall
2. make config
3. make
它说找不到/bin/sh arm-linux-gcc: command not found

是设置的不对，还是没有安装这个arm-linux-gcc？
LZ提到的
2 安装arm-elf交叉编译器 (用于编译ucosii4skyeye 和 uclinux4skyeye)
已经安装好了。
安装的位置不对？

可能是你的arm-linux-gcc可执行文件不在搜索路径，

把 arm-linux-gcc 所在目录添加到PATH系统变量试试。

同上：cygwin上是安装www.uclinux.org/pub/uClinux/uclinux-elf-tools/上的m68k binaries  还是 ARM binaries，我安装了后者，还是编译不出*.elf文件，郁闷死了！

建议在linux下编译arm linux等.

[quote:fdb2f0cc3d="yihect"][quote:fdb2f0cc3d="yihect"]我在编译ucosii for skyeye 的时候提示 文件 ucosii4skyeye/lib/skyeye_printf.c
内的 isdigit 函数没定义，我看已经有 #include <ctype.h> 了， 需要在哪个makfile 配置文件内加个 路径 指示？[/quote]


不用  ulib 下的 libuc.a  ，改用 libc.a 和 libgcc.a 倒是可以的。
不过不算好吧！[/quote]

请问大侠你的问题是如何解决的？？

请问《Skyeye和Arm开发平台》一书上的linux-2.4.18-rmk7.tar.bz2 哪里可以下载，它与光盘上patch-2.4.18-rmk7.bz2  的文件是否相同

谢谢了。
很重要的初学资料呀！

我按照你说的方法作,为什么总出现kernel panic,无法加载根文件系统?我有romfs.img啊,在
tar sim
load 阶段都加载romfs了,
run 的时候就出现panic

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Blkmem: bad access: block=2, count=2 (pos=800, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 2
EXT2-fs: unable to read superblock
Blkmem: bad access: block=0, count=2 (pos=400, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 0
romfs: unable to read superblock
Kernel panic: VFS: Unable to mount root fs on 1f:00

I also meet this problem.
unable to read superblock and kernel panic.
God! help me!
Up

我装2.6.9也不能加载根系统, 按提示想看kernel/workqueue.c:104, 但功力不足.没法找到原因,希望各位赐教

GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(SkyEye) target sim
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x8160cbc
SKYEYE: use arm7100 mmu ops
Loaded ROM   ./boot.rom
Connected to the simulator.
(SkyEye) load
Loading section .init, size 0xc000 vma 0x1000000
Loading section .text, size 0xcdfa8 vma 0x100c000
Loading section __ex_table, size 0x718 vma 0x10d9fb0
Loading section __param, size 0x14 vma 0x10da6c8
Loading section .data, size 0x9614 vma 0x10dc000
Start address 0x1000000
Transfer rate: 7464768 bits/sec.
(SkyEye) run
Starting program: /root/uClinux-dist/linux-2.6.x/linux
Linux version 2.6.9-hsc0 (root@server) (gcc version 3.4.0) #10 Mon May 1 11:08:59 CST 2006
CPU: Atmel-AT91M40xxx [14000040] revision 0 (ARMvundefined/unknown)
Machine: ATMEL EB01
Built 1 zonelists
Kernel command line: root=/dev/ram initrd=0x01300000,800K keepinitrd
PID hash table entries: 32 (order: 5, 512 bytes)
Dentry cache hash table entries: 1024 (order: 0, 4096 bytes)
Inode-cache hash table entries: 512 (order: 0, 4096 bytes)
Memory: 4MB = 4MB total
Memory: 2252KB available (823K code, 100K data, 48K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs... it is
Linux NoNET1.0 for Linux 2.6
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize
loop: loaded (max 8 devices)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
<2>kernel BUG at kernel/workqueue.c:104!
sim_info called

Program received signal SIGINT, Interrupt.
panic (fmt=0x10d2298 "VFS: Unable to mount root fs on %s")
    at kernel/panic.c:102
102             for (;;)
(SkyEye) quit

编译uclinux无法include到系统头文件。
到最后make的时候出现问题，跟了一下makefile，最后在make subdirs.
debian:/usr/src/uClinux-dist/user/boa# pwd
/usr/src/uClinux-dist/user/boa

手工执行:
/usr/src/uClinux-dist/tools/ucfront-gcc arm-elf-gcc  -Os -g \
-fno-common -fno-builtin -Wall   -DEMBED -D__PIC__ -fpic \
-msingle-pic-base -Dlinux -D__linux__ -Dunix -D__uClinux__   \
-c -o alias.o alias.c
.
主要报错信息：
/usr/src/uClinux-dist/uClibc/include/sys/types.h:30: bits/types.h: No such file or directory

查看了一下/usr/include/bits下其实有这个头文件。
请大侠指点迷津。

版本信息：
uClinux-dist-20051110.tar.bz2  
arm-elf-tools-20030314.sh

执行tar sim后 提示 failed to open skyeye config file skyeye.conf in the same directory.哪里有这个文件？

我现在在/usr/local/bin/下面都装了 skyeye, arm-elf-tools,skyeyeinsight接下来如果要调试一些小程序应该怎么办？

arm-elf-tools我一直下不下来呀～！！
uClinux网站打开好慢阿，有没有其他的地方可以下载呀？急需谢谢大家