wangkunlfans

在make lib时好像没有出错，而在运行make时，好像在连接阶段找不到符号的定义，不知何故，请高手赐教。错误信息如下：
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `PC'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `tgetflag'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `tgetent'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `UP'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `tputs'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `tgoto'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `tgetnum'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `BC'
/tmp/skyeye-1.3.0_rc1/common/.libs/libcommon.so: undefined reference to `tgetstr'
collect2: ld returned 1 exit status
make[2]: *** [skyeye] 错误 1
make[1]: *** [all-recursive] 错误 1
make: *** [all] 错误 2
wangkun@WK-Ubuntu:/tmp/skyeye-1.3.0_rc1$

[ 本帖最后由 wangkunlfans 于 2010-3-5 11:05 编辑 ]

wangkunlfans

参考其他的帖子：http://www.linuxfans.org/bbs/thread-190949-1-2.html
主要是缺少termcap库文件，在终端里执行sudo apt-get install libncurses5-dev安装，然后重新配置，重新编译库和源，成功，多谢！！